APEC Forum for Digital Transformation of Remote Healthcare

General Manager

+886-22658-2223/ +886958325565

2F, No. 40, Lange 91, Sec. 1, Nei-Hu Rd. Taipei

Asia University

Master of Business Administration

1. FlySheet Med-Informatics Co., Ltd.

2. Ciba Vision

3. MicroLife Corporation

The Solutions for Medical Information Resources and Research & Scholarship Lifecycle

Provides medical information and digital healthcare solutions for clients, including:

• Medical informatics and digital healthcare transformation assistance

• Establishment of strategic partnerships (government organizations, educational/medical institutions, and corporates)

• Medical information integration, analysis, and strategic planning

• International exchange of experts and institutions

Senior Specialist

+886-2-2321-2200ext.8180

No.15, Fuzhou St., Zhongzheng Dist., Taipei City

1. Ph. D degree. International Ph.D. Program in Cell Therapy and Regenerative Medicine. Taipei Medical University.
2. Master degree. Graduate Institute of Medical Sciences, College of Medicine, Taipei Medical University.
3. Bachelor degree. School of Pharmacy. Taipei Medical University.

1. Senior Specialist, Intellectual Property Office, Ministry of Economic Affairs.
2. Section Chief,
3. Technical Specialist, Department of Industrial Technology, Ministry of Economic Affairs.
4. Technical Specialist, Industrial Development Bureau, Ministry of Economic Affairs.
5. Subdivision Chief, Department of Health, Taipei City.

New Drug Development, Medical device Development, Industry Development Strategy, Health Policy, Medical/Health care Regulations.

1. Shen W.-C., Jan Y.-K., Liau B.-Y., Lin Q., Wang S., Tai C.-C., Lung C.-W. Effectiveness of self-management of dry and wet cupping therapy for low back pain: A systematic review and meta-analysis (2022) Medicine (United States), 101 (51), art. no. e32325.
2. Tai, C.C., Huang, C.C., Chou, B.H., Chen, C.Y., Chen, S.Y., Huang, Y.H., Sun, J.S., Chao, Y.-H. Profiled polyethylene terephthalate filaments that incorporate collagen and calcium phosphate enhance ligamentisation and bone formation. Eur Cell Mater. 2022 Jun 2;43:252-266.
3. Tai, C.-C., Huang, Y.-M., Liaw, C.-K., Yang, K.-Y., Ma, C.-H., Huang, S.-I., Huang, C.-C., Tsai, P.-I., Shen, H.-H., Sun, J.-S., Chen, C.-Y. Biocompatibility and Biological Performance of Additive-Manufactured Bioabsorbable Iron-Based Porous Interference Screws in a Rabbit Model: A 1-Year Observational Study. Int J Mol Sci. 2022 Nov 23;23(23):14626
4. Tai, C.-C., Lo, H.-L., Liaw, C.-K., Huang, Y.-M., Huang, Y.-H., Yang, K.-Y., Huang, C.-C., Huang, S.-I., Shen, H.-H., Lin, T.-H., Lu, C.-K., Liu, W.-C., Sun, J.-S., Tsai, P.-I., Chen, C.-Y. Biocompatibility and biological performance evaluation of additive-manufactured bioabsorbable iron-based porous suture anchor in a rabbit model. Int J Mol Sci. 2021 Jul 8;22(14):7368.
5. 專利名稱:用於肌腱及/或韌帶的組織支架，專利人:沈欣欣,蔡佩宜,黃志傑,戴建丞*,溫奕泓,郭正亮,馬俊賢,徐麗道,黃馨怡,楊國義,吳宗憲，專利證號7293308，國別:日本，專利期限:20411021
6. 專利名稱:用於肌腱及/或韌帶的組織支架，專利人:沈欣欣,蔡佩宜,黃志傑,戴建丞*,溫奕泓,郭正亮,馬俊賢,徐麗道,黃馨怡,楊國義,吳宗憲，專利證號I765500，國別:中華民國，專利期限:20401228

Digital Health Strategist, HIMSS

+65 97587363

808 Thomson Road, Thomson 800, Singapore 298190

1. Harvard T.H. Chan School of Public Health, Boston, USA, 2010

Master of Public Health (MPH)

2. St. John’s Medical College (Rajiv Gandhi University of Health Sciences), Bangalore, India, 2008

Bachelor of Medicine, Bachelor of Surgery (MBBS)

3. Royal Society for Public Health, United Kingdom 2021

Fellow

1. Healthcare Information Management Systems Society (HIMSS), Singapore, January 2022 – Present

Digital Health Strategist, Analytics

2. The Economist Group (TEG), Singapore March 2019 – January 2022

Senior Manager, Health Policy and Clinical Evidence

3. National University Health System (NUHS), Singapore January 2018 – February 2019

Manager, Centre for Chronic Disease Prevention and Management

4. Agency for Integrated Care (AIC), Singapore September 2016 – December 2017

Assistant Manager

5. National University of Singapore (NUS) – School of Public Health, Singapore Nov 2010 – Nov 2013

Research Associate

Dr Rohini Omkar Prasad is a Digital Health Strategist for HIMSS Analytics, APAC, where she supports healthcare providers across the Asia-Pacific in their digital transformation journeys. She is passionate about leveraging the power of technology to engage with patients and populations, creating strong connections and proactive communication between providers and patients to bridge gaps and improve outcomes. With a medical and public health background, Rohini brings a clinical perspective to the implementation of technology applications and innovations ensuring care delivery is first and fore-most person centric and focused on reducing inequities and fulfilling unmet needs.

Rohini holds a degree in medicine from St John’s Medical College in India and graduated with a master’s degree in public health from Harvard University in 2010.

• Subramaniam M, Omkar Prasad R, Abdin E, Vaigankar JA, Chong SA. Single Mothers have a Higher Risk of

Mood Disorders. Ann Acad Med Singapore 43(3): 145-51, March 2014.

• Lim WY, Tan CS, Loy EY, Omkar Prasad R, Seow A, Chia KS. Lung Cancer Incidence in Singapore: Ethnic and

Gender differences. Lung Cancer 84(1): 23-30, April 2014.

• NUS Global Asia Institute 2011. Prevention of Type 2 Diabetes mellitus in Asia, NIHA Forum White Paper,Singapore.

CEO

02-22523030

Rm. 4, 10F., No.335, Ruiguang Rd. Neihu Dist., Taipei City 11492, Taiwan

FENG CHIA UNIVERSITY, Department of Information Engineering and Computer Science

Founder & CEO of imedtac Co., Ltd.

VP of Advantech Co., Ltd.

Over 20 years of experience in ICT, IoT, and healthcare industries

Convener of the intelligent healthcare SIG for Taipei Computer Association

Director, Information Service Industry Association of ROC (Taiwan)

Director, Aging Industry Innovation Development Association

PhD in Managaement, Researcher

51 999262608

Jr. Mercator 511

• Universidad de Valladolid, PhD in Economics (c) (2021 to date)
• Harvard University, Kennedy School of Government |Public Leadership Credential (2021 - 2023)
• Universidad CARLOS III de Madrid, PhD in Management (2012 - 2017)
• Harvard University, Program of Negotiation for Senior Executives (2012)
• Universidad ESAN, Master in Management Sciences Research (2009 - 2012)
• EGADE, Post graduate Program in Financial Risk Management (2009 - 2011)
• Thunderbird - School of Global Management, (Arizona State) GMBA (2006 - 2008)
  • EGADE - Master of Business Administration in Global Management
  • Beta Gamma Sigma y Pi Sigma Alpha.
• Pontificia Universidad Católica del Perú, BS in Industrial Engineering (1994 - 2000)

Peruvian Senior executive, consultant and international trainer in strategic management, risks, process, and finance with more than 23 years of experience public sector and in companies from IT, banking, securities, consulting services, oil and retail sectors, developing businesses in Latin America and the United States.

Professor and Researcher (accredited by Renacyt – Carlos Monge II | Concytec) at Esan University. Director of GFI of Peru and Colombia; Director in 3420 Wealth Management, Advisor in Lima Oiffice World Bank; Founder at Grupo Invextiga; Member of the Technical Committees for Standardization (CTN) of the National Institute of Quality (INACAL) in Risks and Quality for Integrity.

He has carried out different consultancies for IOM – United Nations in the Foreign Ministry, USAID | Chemonics TAPI Project at the OSCE; UNDP in the Ministry of Culture; Transparency | PCM SIP; Petroperu; Inretail; Inacal; National bank; BCRP Cooperative; CLADEA, ASOMIF; AAP; CELSA; AFP Integra; Ica box; Caja de Arequipa, among others. He has served as Director of Petroleos del Perú and President of the Board of Directors of Esvisac

Additionally, CEO of GFI del Perú (GFI Group Company | BGC) and has served as General Manager of Data Técnicos S.A | Datatec (Company of the BVL Group of Lima and SIF Icap México) and as a consultant and advisor in companies in the Hydrocarbons, retail, services, technology, and banking sectors. In addition to having an accreditation in risk management, compliance, and anti-bribery.

• Ranking Compliance Expert, Leader League, Lima (2020 - 2023)
  • Top 2 in Peruvian Market
• United Nations Institute for Training and Research (2023 - 2022)
  • Emprendimiento para personas Migrantes y Refugiadas (UNITAR, UNCTAD), 03/2023
  • Risk Reduction of Chemicals (Unitar | KEMI), 12/2022
  • Enforcement of Chemicals Legislation (Unitar | KEMI), 12/2022
  • Sustainable Financing of Institutional Capacity for Chemical Control (Unitar | KEMI), 12/2022
  • Crisis Management for Public Officials
• Risk Management ISO 31000, PECB. (2022)
• Anti-Bribery| Auditor Leader ISO 317001, PECB. (2022)
• Compliance, Aenor. (2018)
• Research Level II (CONCYTEC), Lima. (2017 to date)
• Risk, Bureau Veritas del Perú, Gestión de Riesgos ISO 31000 (2013)
• Quality: Expert Qualified in ISO 9001:2008, AENOR. (2011)
• Certificate in Project Management and Quality, PUCP (2005)
• Certificate in Strategic Sales Management, EGADE (2004)

I have participated in seminars and presentations in several universities in Mexico and Colombia. The topics that I used to investigate are: Risk, Reputation, CSR and Compliance, but I made research in Finance and Corporate Governance. About my previous papers, these are showed below:

• Journal of Business Research – ISI, 2023
  • Paper: Industry momentum in Latin America
• The European Journal of Finance – ISI, 2023
  • Paper: Corruption, national culture and corporate investment: European evidence
• Corruption, national culture and corporate investment: European evidence – ISI, 2022
  • Paper: Determinants of inbound tourism revenues in Peru: evidence from a crisis period
• Sustainability - ISI, 2022
  • Paper: CSR in Education on Business Confidence: Mediation Effect of Corporate Reputation
• Journal Eurasian Business Review - ISI, 2022
  • Paper: Formal institutions, ICSID arbitration and firm performance: evidence from Latin America
• Journal of Economics, Finance and Administrative Science – Scopus, 2021
  • Paper: Deviations from fundamental value and future closed-end country fund returns
• Revista Research in International Business and Finance – ISI, 2020
  • Paper: Firm profitability and expected stock returns: Evidence from Latin America
• Revista Academy of Management Global Proceedings – ISI, 2020
  • Paper: Are the Educational CSR Actions Profitable?: Analysis for an Emerging Country in the Banking Sector
• Revista del CLAD Reforma y Democracia – ISI, 2019
  • Paper: Gestión empresarial: una revisión a la norma ISO 37001 antisoborno
• Research in Finance – Scopus, 2018
  • Paper: Micro Finance Sector in Emerging Capital Markets Peruvian Financial Entity: CMAC Huancayo
• Journal of Business Research - ISI, 2017
  • Paper: Extreme daily returns and the cross-section of expected returns: Evidence from Brazil.
• Journal of Globalization, Competitiveness / Georgetown University – Universia, Scopus, 2016
  • Paper: Gobierno Corporativo en Mercados Emergentes: Impacto en la Bolsa de Valores de Lima-BVL
• Academia Revista Latinoamericana de Administración - ISI, 2014
  • Paper: Factores Determinantes de la Estructura de Capital: Evidencia del Mercado de Valores Peruano

Vice President

+886-2-26586288 ext 17570

5F No. 585, Ruiguang Rd., Neihu Dist., Taipei City 11492, Taiwan (R.O.C.)

- BS Electronic Engineering, National Taiwan University, 1987

- Ph.D, VLSI Computer Aided Design, National Taiwan University, 1994

- VP Software, Innovation & Incubation, Compal Electronics, since 2016

- GM, Greater China, Photonics Industries International, Inc, 2015

- AVP, Foxconn, 2013

- Special Assistant to President, Supermicro, 2010

- Chief Software Supervisor, ASUS. 2004

- CEO and co-founder, Timerwell Technologies, 1999

- Researcher, Chunghwa Telecom, 1994

- AI with DNN on Video Analysis and Prediction

- Cloud Technologies and Services

- Software Technologies, Architecture, and Engineering

- Design Automation

- Innovation, Incubation for startups

Publications (Recent)

• Pseudo Ground Truth Segmentation Mask to Improve Video Prediction Quality Pseudo Ground Truth Segmentation Mask to Improve Video Prediction Quality，2020 IEEE 9th Global Conference on Consumer Electronics (GCCE) · Oct 13, 2020
• Auto Curation on FaceNet Embeddings with Gamma and Gaussian Distribution to Predict Model Performance in Actual Industrial Deployment Auto Curation on FaceNet Embeddings with Gamma and Gaussian Distribution to Predict Model Performance in Actual Industrial Deployment, 2020 International Conference on Pervasive Artificial Intelligence (ICPAI) · Dec 1, 2020
• Using Segmentation to Enhance Frame Prediction in a Multi-Scale Spatial-Temporal Feature Extraction Network Using Segmentation to Enhance Frame Prediction in a Multi-Scale Spatial-Temporal Feature Extraction Network, 2020 International Conference on Pervasive Artificial Intelligence (ICPAI) · Nov 30, 202
• And some over hundred conference papers.

Awards (Team, Recent)

• Smart City Healthcare Innovation Award, 2023
• Young Award, Business Model Innovation Award, 2022
• Symbol of National Quality (SNQ) Award, 2022
• National Innovation Award, Intelligent Healthcare, 2022
• National Healthcare Quality Award, 2021

Chief Marketing Officer and Co-Founder

+886905297528

New Taipei City, Taiwan

National Cheng Kung University, BA, Foreign Language and Business Management

National Cheng Chi University, Public policy and Business management Class #170

Mr. Lin served as a product manager in Advantech, the leading company in the Industrial Computer in the world and AOPEN, an Acer group company. He was the general manager of AOPEN Asia and AOPEN China for more than 15 years during which he had successful build the partnership with partners and customers.

Mr. Lin joined Biomedica in 2022 as Chief Marketing Officer and co-Founder. He has been successfully build up the partnership with major hospitals and distributors channel network across Asia countries.

Mr. Lin is experienced in company strategy and market positioning for 30 years. Since joining Biomedica, He has been very active and focused on understanding the smart health care status and demand in Asia. He has been successfully promoting medical AI and Smart NGS Lab solutions to the smart health care market and eco-system in Asia market including Japan, Korea, Singapore, Malaysia, Vietnam and other Asia countries.

Dean, Professor

+603 8656 7228

School of Dentistry, International Medical University

126, Jalan Jalil Perkasa 19, Bukit Jalil

57000, Kuala Lumpur, Malaysia

1991 BDS, University of Malaya

1994 MSc, Eastman Dental Institute, United Kingdom

1995 Fellowship in Dental Surgery, The Royal College of Surgeons England

2006 PhD. University of Malaya, Prosthodontics

2022 Postgraduate Certificate in Heath Education Profession

2023 Fellow of the Faculty of Dental Trainers, The Royal College of Surgeons Edinburgh

Dean, School of Dentistry, International Medical University

Prosthodontics, Dental education, Adhesive dentistry

• Seow, L. L., Toh, C. G., & Wilson, N. H. (2003). A survey of current practices among general dental practitioners in Manchester in 2002. Primary Dental Care, (3), 87-92.
• Lim, T. W., Goh, A. C., & Seow, L. L. (2007). Current Philosophies and Practices of General Dental Practitioners pertaining to Direct Restorations, Bleaching and Endodontics. Malaysian Dental Journal, 28(2).
• Hayashi, M., Seow, L. L., Lynch, C. D., & Wilson, N. H. F. (2009). Teaching of posterior composites in dental schools in Japan. Journal of oral rehabilitation, 36(4), 292-298.
• LL Seow. (2009). The Impact of “New Science” on Current Trend of Dental Education, Malaysian Dental Journal, 30(1), pg. 5.
• Lynch, C. D., Hayashi, M., Seow, L. L., Blum, I. R., & Wilson, N. H. F. (2013). The management of defective resin composite restorations: current trends in dental school teaching in Japan. Operative Dentistry, 38(5), 497-504.
• Pau, A., Omar, H., Khan, S., Jassim, A., Seow, L. L., & Toh, C. G. (2017). Factors associated with faculty participation in research activities in dental schools. Singapore dental journal, 38, 45-54.
• Hong, G., Chang, T. Y., Terry, A., Chuenjitwongsa, S., Park, Y. S., Tsoi, J. K., Liang Lin Seow, Hsu, M. L. (2020). Guidelines for innovation in dental education during the coronavirus disease 2019 pandemic. Journal of oral science, 20-0399.
• Mahdi, S. S., Ahmed, Z., Allana, R., Peretti, A., Amenta, F., Nadeem Bijle, M., ... & Daood, U. (2020). Pivoting Dental Practice Management during the COVID-19 Pandemic—A Systematic Review. Medicina, 56(12), 644.
• Syed Aznal, S. S., Nadarajah, V. D. V., Kwa, S. K., Seow, L. L., Chong, D. W., Molugulu, Keng, P. S. (2021). Validation of a ‘work readiness scale’for health professional (HP) graduates. Medical teacher, 43(sup1), S33-S38.
• Menon, R. K., & Seow, L. L. (2021). Development of an Online Asynchronous Clinical Learning Resource (“Ask the Expert”) in Dental Education to Promote Personalized Learning. In Healthcare (Vol. 9, No. 11, p. 1420). Multidisciplinary Digital Publishing Institute.
• Daood, U., Aati, S., Akram, Z., Yee, J., Yong, C., Parolia, A., L. L. Seow & Fawzy, A. S. (2021). Characterization of multiscale interactions between high intensity focused ultrasound (HIFU) and tooth dentin: the effect on matrix-metalloproteinases, bacterial biofilms and biological properties. Biomaterials science, 9(15), 5344-5358.
• Daood, U., Malik, A. A., Ilyas, M. S., Ahmed, A., Qasim, S. S. B., Banavar, S. R., & Seow, L. L. (2021). Antimicrobial and self‐crosslinking potential of experimentally developed dioctadecyldimethyl ammonium bromide and riboflavin dentin adhesive. Journal of Biomedical Materials Research Part A, 109(11), 2392-2406.
• Patil, P. G., Seow, L. L., Uddanwadikar, R., Pau, A., & Ukey, P. D. (2022). Stress and strain patterns of 2-implant mandibular overdentures with different positions and angulations of implants: A 3D finite element analysis study. The Journal of Prosthetic Dentistry.
• Patil, P., Seow, L. L., Kweh, T. J., & Nimbalkar, S. (2022). Unsplinted attachment systems and peri-implant outcomes in two-implant-retained mandibular overdentures: a systematic review of randomized controlled trials. The Journal of Contemporary Dental Practice, 22(11), 1346-1354.
• Patil, P. G., Seow, L. L., Kweh, T. J., & Nimbalkar, S. (2022). Unsplinted Attachments and Patient-Reported Outcome Measures (PROMs) in 2-Implant-Retained Mandibular Overdentures: A Systematic Review. International Journal of Dentistry, 2022.
• Wong, S. J., Patil, P., & Seow, L. L. (2022). Interdisciplinary Approach to correct Maxillary Anterior Single Tooth Crossbite with Fixed Dental Prosthesis. International Journal of Prosthodontics and Restorative Dentistry, 8(3), 91-95.
• Daood, U., Ilyas, M. S., Ashraf, M., Akbar, M., Bapat, R. A., Khan, A. S., Seow L.L. & Yiu, C. (2022). Biochemical changes and macrophage polarization of a silane-based endodontic irrigant in an animal model. Scientific reports, 12(1), 1-16.
• Bapat, R. A., Muthusamy, S. K., Sidhu, P., Mak, K. K., Parolia, A., Pichika, M. R., Seow L.L & Daood, U. (2022). Synthesis and Incorporation of Quaternary Ammonium Silane Antimicrobial into Self‐Crosslinked Type I Collagen Scaffold: A Hybrid Formulation for 3D Printing. Macromolecular bioscience, 22(3), 2100326.

An adhesive composition for dental treatment and a method of preparing thereafter.

Grant number- MY-197766-A

Malaysian Registrar of Patents

Professor

+886(2) 1 27361661

250 Wu-Hsing Street, Taipei City

DDS, Taipei Medical university, Taipei, Taiwan ,1995

PhD, Tokyo Medical and Dental University , Tokyo ,Japan ,2002

MS, College of Commerce (EMBA), National Chengchi University, Taipei, Taiwan, 2005

Training

1995-1997 General Dentistry, Taipei Medical university, Taipei, Taiwan

1997-2002 Pediatric Dentistry, Tokyo Medical and Dental University, Tokyo ,Japan

Professor, School of Dentistry, College of Oral Medicine, Taipei Medical University

Chair, Pediatric Dentistry, College of Oral Medicine, Taipei Medical University

Pediatric dentistry

Biomaterials

Informatics

Inorganic materials

Anti-Caries materials

Executive Editors

Journal of Dental Science

Taiwan Journal of Pediatric Dentistry

Organization Committee

Executive Director of Taiwan Academy of Pediatric Dentistry

Director of Association for Dental Sciences of the Republic of China

Councillor of Oral Medicine Council, Ministry of Health and Welfare

Associate Professor

+81-3-5803-5379

+81-70-3032-8720

Digital Dentistry, Graduate School of Medical and Dental Sciences,

Tokyo Medical and Dental University (TMDU)

1-5-45, Yushima, Bunkyo, Tokyo 113-8549, Japan

2005-2009 Ph.D. Tokyo Medical and Dental University, Graduate School of Medical and Dental Sciences
(Thesis: Iwaki M, Akiba N, Minakuchi S, Takahashi H. Influence of methyl mercaptan at early setting stages on the properties of self curing addition silicone resilient denture lining materials. J Prosthodont Res. 2009 Oct;53(4):161-5.)

1999-2005 D.D.S. Tokyo Medical and Dental University, School of Dentistry
Dental Board Certifications: JAPAN - 2005, #153745, Dental (National Board)

2009 - 2012 Clinical staff (Department of Prosthodontics, Division of Clinical Dentistry, University Hospital, TMDU)

2012 - 2014 Assistant Professor (Gerodontology and Oral Rehabilitation, TMDU)

2014 - 2018 Clinical staff (Department of General Dentistry, Division of Clinical Dentistry, University Hospital, TMDU))

2018 - 2021 Extraordinary Assistant Professor (General Dentistry, TMDU)

2022 to date Associate Professor (Digital Dentistry)

2018 - 2021 Expert Member, Committee on Grants-in-Aid for Scientific Research, Japan Society for the Promotion of Science (JSPS), Independent Administrative Institution

AO Best Poster award for 2018：Academy of Osseointegration Annual Meeting 2018

Application Number: P17-063P-JP

Date of filing: 28.3.2019

Title: Methods of manufacturing a complete denture, complete dentures, and equipment for manufacturing complete dentures

Assist. Prof., Dr.

+66 2218 8795

Department of Operative Dentistry, Faculty of Dentistry, Chulalongkorn University Henri-Dunant Rd., Patumwan Bangkok 10330

Apr 2000 Microendodontics and microsurgery course: University of Pennsylvania

Mar 2000 Ph.D. (Dental Science): Tokyo Medical and Dental University, Japan

Mar 1993 Doctor of Dental Surgery, DDS (Honorary): Chulalongkorn University

2000/06 - 2016/03 Lecturer：Department of Operative Dentistry, Chulalongkorn University

2016/03 – Present Assistant Professor：Department of Operative Dentistry, Chulalongkorn University

Microendodontics and microsurgery

Dental Science

Hiran-us S, Sawasdichai J, Pimkhaokham S, Ebihara A, Suda H. Shaping ability of ProTaper NEXT, ProTaper Universal and iRace files in simulated S- shaped canals. Aust Endod J. April 2016;42(1):32-36. SCOPUS

Distinguished Professor

05-2720411

168 University Road, Ming-Hsiung, Chiayi

Ph.D. Mechanical Engineering, March 1991

The Ohio State University, Columbus, Ohio

M.S.,Mechanical Engineering, June, 1988

The Ohio State University, Columbus, Ohio

B.S.,Mechanical Engineering, June, 1984

National Taiwan University, Taipei, Taiwan

2010 – president Founder and CTO, INTEWARE Co., Ltd., Taiwan

8/99 – president Professor, Department of Mechanical Engineering, National Chung Cheng University, Taiwan

8/94 – 7/99 Associate Professor, Department of Mechanical Engineering, National Chung Cheng University, Taiwan

7/93 – 7/94 Technical Specialist, Tech Center, Cummins Engine Company, Columbus, Indiana

4/91 – 6/93 Senior Engineer, Tech Center, Cummins Engine Company, Columbus, Indiana

Dr. Hong-Tzong Yau is a professor of Mechanical Engineering and Director of Precision Molding Center at the National Chung Cheng University, Chia-Yi, Taiwan. He received his MS and PhD degrees from the Ohio State University in 1988 and 1991 respectively. He was recruited by Cummins Engine upon graduation as a senior research engineer. He later joined the National Chung Cheng University in 1994. Dr. Yau’s research interests include precision engineering, customized CAD/CAM/CNC system, digital dentistry, and additive manufacturing. He holds 40 patents and has published 130 peer-reviewed international journal and conference papers.

Early in his career, Dr. Yau was devoted to the development of customized CAD/CAM systems. He had helped many world leading manufacturers including sports footwear giant Nike and the world’s largest shoe manufacturer Pouchen Group, as well as machine tool companies, to improve their product quality and production efficiency. In recent years, by integrating medical imaging, customized CAD/CAM, 5-axis machining and 3D printing, Dr. Yau has developed advanced digital dental solutions in dental implantology and orthodontics. As a result, twenty million US dollars was attracted to set up TDS (Total Dental Solution), a Taiwan-based bio-tech company that has sold his systems and products to more than 20 countries worldwide. Dr. Yau has also founded 3 start-up tech companies in the area of digital dentistry, 3D printing, and smart manufacturing. Lately, Dr. Yau is collaborating with Taiwan electronics and machine tool companies to develop innovative 3D printing systems for dental implant and orthodontics applications, which is expected to bring more impact to the digital dentistry world.

2020-2022 Stanford list Top% 2 scientist in the world

2018 Outstanding Engineering Professor, Chinese Mechanical Engineering Society

2015 Thomas French Award (Ohio State ME outstanding alumni award)

2015 Distinguished Professor, National Chung Cheng University

CTO

+886-2-23629877

4F, No. 136, Sec. 3, Roosevelt Rd., Zhongzheng Dist., Taipei City 100032, Taiwan (R.O.C.)

University of Illinois Urbana-Champaign, Doctor of Philosophy, Computer Science

National Taiwan University, Master of Science, Computer Science

dentall.Co.,Ltd 台灣牙e通, CTO

• Establish a research and development team in the company to build an internationally advanced dental clinic management system, and become the largest dental information integration platform in Taiwan. At the same time, building an AI team to develop cutting-edge technologies such as image analysis and natural language processing.

SAVY Inc, CEO

• The main product, Crosspoint, an innovative system that utilizes motion capture technology for posture and functional assessments. By analyzing individual musculoskeletal conditions, Crosspoint tailors personalized training plans and consolidates health data in a single, centralized location.

TY Wang is an entrepreneur, product manager, and software developer who serves as the CTO of dentall Co.,Ltd.

He spearheaded the formation of a research and development team within the dentall company to construct an internationally advanced dental clinic management system, which subsequently evolved into Taiwan's largest dental information integration platform. Concurrently, he established an AI division to explore the frontiers of image analysis and natural language processing technologies.

In 2018, he is credited with inventing Crosspoint, an innovative system that utilizes motion capture technology for posture and functional assessments. By analyzing individual musculoskeletal conditions, Crosspoint tailors personalized training plans and consolidates health data in a single, centralized location.

He launched AutoInsight.io, a used car data analytics company, in 2015. His team earned the prestigious StartUp Next Taipei award (a Techstars program) and was named a SeedStar World Taipei finalist. They also claimed victory in Taiwan's largest startup competition, FITI. Wang is a respected fellow of the Startup Leadership Program (SLP) Taipei Chapter and holds over 10 international papers and patents in the fields of mobile computing, security, wireless communication, and data analytics.

Selected Awards:

• 3 times Championship, Microsoft Imagine Cup Software Design Competition,

• FITI - Startup Competition Champion - Ministry of Science and Technology, Taiwan

• Excellent Award - StartUp Next Taipei (Techstars program)

Selected US Patents:

• Apparatuses and methods for roaming public land mobile network (plmn) selection, US20130035095 A1US US20130035095 A1

• DATA TRANSMISSION ADJUSTMENT SYSTEM AND DATA TRANSMISSION ADJUSTMENT METHOD, US 2012/0190357 A1US US 2012/0190357 A1

• System and Method of Detecting Air Pollution, Route-Planning Method Applied to Said Detection System, and Warning Method of Air Pollution, US 2009/0309744 A1US US 2009/0309744 A1

• Volunteer Search System, Volunteer Search Server and Search Method Thereof, US 2011/0106820 A1

Selected Publications:

• mAuditor: Mobile Auditing Framework for mHealth Applications, MobileHealth

• Tradeoff between Energy Efficiency and Report Validity for Mobile Sensor Networks, ACM Transaction on Sensor Network

• A Region-based Reporting Scheme for Mobile Sensor Networks, Proceedings of IEEE VTC 2010 Spring Conference